Fabia Mk2
Electric/electronic components and fitting locations of the automatic gearbox DSG - 0AM |
Vehicles Octavia II, Superb II and Yeti |
1 - | Diagnostic connection |
q | Fitting location: Cover in driver's footwell |
2 - | Selector lever position indicator -Y6- |
q | Fitting location: integrated in the dash panel insert |
q | a switched off gear display points to an emergency operation with deactivated gearbox control unit |
q | a fully lit gear display points to an emergency operation with activated gearbox control unit |
q | can only be replaced together with the dash panel insert → Electrical System; Rep. gr.90 |
3 - | Cover for shift mechanism with lamp for selector lever scale illumination -L101- |
q | the lamp for selector lever scale illumination -L101- is integrated in the cover frame; fitting location → Fig. |
q | the lamp for selector lever scale illumination -L101- is checked by self-diagnosis |
q | removing and installing → Chapter |
4 - | Gearbox input r.p.m. sender -G182- |
q | Fitting location → Fig. |
q | is checked by self-diagnosis |
q | is an integral part of the mechatronics for double clutch gearbox -J743- |
q | can only be removed and installed with the°mechatronics for double clutch gearbox -J743- → Chapter |
5 - | Mechatronics for double clutch gearbox -J743- |
q | Fitting location → Fig. |
q | is checked by self-diagnosis |
q | removing and installing → Chapter |
6 - | Selector lever lock solenoid -N110- |
q | Fitting location → Fig. |
q | is checked by self-diagnosis |
7 - | Selector lever -E313- with Tiptronic switch -F189-, selector lever sensor control unit -J587- and selector lever switch locked in P -F319- |
q | Fitting location → Fig. |
q | are checked by self-diagnosis |
q | Tiptronic switch -F189-, selector lever sensor control unit -J587- and selector lever switch locked in P -F319 - are integrated into the shift mechanism. |
q | these components cannot be replaced separately; the removal and installation procedure is only possible together with the gearshift mechanism → Chapter or → Chapter |
8 - | Brake light switch -F- and brake pedal switch -F47- |
q | Fitting location → Fig. |
q | Signal transfer from engine control unit to gearbox control unit via CAN databus |
q | is checked by self-diagnosis |
q | removing and installing → Chassis; Rep. gr.46 |
9 - | Kick-down switch -F8- |
q | Fitting location → Fig. |
q | Signal transfer from engine control unit to gearbox control unit via CAN databus |
q | is checked by self-diagnosis |
q | Removing and Installing → Engine; Rep. gr.20 |
|
|
|
|
|
|
Vehicles Fabia II and Roomster |
1 - | Diagnostic connection |
q | Fitting location: dash panel in the area of the driver's footwell |
2 - | Selector lever position indicator -Y6- |
q | Fitting location: integrated in the dash panel insert |
q | a switched off gear display points to an emergency operation with deactivated gearbox control unit |
q | a fully lit gear display points to an emergency operation with activated gearbox control unit |
q | can only be replaced together with the dash panel insert → Electrical System; Rep. gr.90 |
3 - | Cover for shift mechanism with lamp for selector lever scale illumination -L101- |
q | the lamp for selector lever scale illumination -L101- is integrated in the cover for gearshift mechanism -arrow- |
q | the lamp for selector lever scale illumination -L101- is checked by self-diagnosis |
q | removing and installing → Chapter |
4 - | Gearbox input r.p.m. sender 3 -G641- |
q | Fitting location → Fig. |
q | is checked by self-diagnosis |
q | is an integral part of the mechatronics for double clutch gearbox -J743- |
q | can only be removed and installed with the°mechatronics for double clutch gearbox -J743- → Chapter |
5 - | Mechatronics for double clutch gearbox -J743- |
q | Fitting location → Fig. |
q | is checked by self-diagnosis |
q | removing and installing → Chapter |
6 - | Selector lever lock solenoid -N110- |
q | Fitting location: is integrated firmly in the gearshift mechanism and cannot be replaced separately |
q | is checked by self-diagnosis |
q | the removal and installation procedure is only possible together with the gearshift mechanism → Chapter. |
7 - | Selector lever -E313- with Tiptronic switch -F189-, selector lever sensor control unit -J587- and selector lever switch locked in P -F319- |
q | is checked by self-diagnosis |
q | Tiptronic switch -F189-, selector lever sensor control unit -J587- and selector lever switch locked in P -F319- are integrated into the shift mechanism. |
q | these components cannot be replaced separately; the removal and installation procedure is only possible together with the gearshift mechanism → Chapter |
8 - | Brake light switch -F- and brake pedal switch -F47- |
q | Fitting location → Fig. |
q | is checked by self-diagnosis |
q | removing and installing → Chassis; Rep. gr.47 |
9 - | Kick-down switch -F8- |
q | Fitting location → Fig. |
q | Signal transfer from engine control unit to gearbox control unit via CAN databus |
q | is checked by self-diagnosis |
q | Removing and Installing → Engine; Rep. gr.20 |
|
|
|
|