Octavia Mk1
Parts of the cooling system fitted to body |
1 - | Radiator |
q | after replacing fill entire system with fresh coolant |
q | removing and installing → Chapter |
2 - | O-ring |
q | replace |
3 - | Top coolant hose |
q | secured using a retaining clip |
q | connection diagram for coolant hoses → Chapter |
4 - | Fan shroud |
5 - | 10 Nm |
6 - | Auxiliary fan |
q | for vehicles with air conditioning system or additional equipment |
7 - | Fan holder |
8 - | Retaining clip |
q | for fan cable |
q | check tightness |
9 - | Connector |
10 - | Radiator fan |
11 - | to coolant pipe |
q | connection diagram for coolant hoses → Chapter |
12 - | Expansion reservoir |
q | Inspect cooling system with tester, e.g. -V.A.G 1274- and adapter -V.A.G 1274/8- for leaks. |
13 - | Cap |
q | inspect using the testing device -V.A.G 1274- and adapter -V.A.G 1274/9- |
q | Overpressure of 1.4...1.6 bar |
14 - | Support |
q | for fan connector |
15 - | Bottom coolant hose |
q | attached to radiator with retaining clip |
q | connection diagram for coolant hoses → Chapter |
16 - | O-ring |
q | replace |
17 - | Thermo-switch -F18-, 35 Nm |
q | for radiator fan |
q | switching temperatures: |
1. Stage |
on: 92...97°C |
off: 84...91°C |
2. Stage |
on: 99...105°C |
off: 91...98°C |
18 - | Support |
q | for radiator |
q | Check fitting position |
q | pay attention to different version |
19 - | 10 Nm |