skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Measure main pressure > < Measure limit speed of the hydraulic converter

Octavia Mk1

Limit speed of the hydraulic converter in rpm
   
Limit speed of the hydraulic converter in rpm
Identification characters of the automatic gearbox 01M
(engine power in kW)		Identification characters of the torque converterLimit speed of the hydraulic converter
rpm
FDB
(66 kW)		QCDD2500 … 2700
DMS, ECT
(74 kW)		QADC2300 … 2500
DTB, ERQ, ESB, ESE
(74 kW)		QADC2350 … 2550
ESJ
(74 kW)		QADD2350 … 2550
FDH
(74 kW)		QADD2450 … 2650
ELZ
(85 kW)		QBDC2550 … 2750
EPH, FDG
(85 kW)		QBDD2550 … 2750
FDF
(85 kW)		QBDD2400 … 2600
DSD, ECS
(92 kW)		QADC2400 … 2600
DVH
(110 kW)		QCDC2300 … 2500
ECP, ELU
(110 kW)		QCDC2200 … 2400
EPC, FDC
(110 kW)		QCDD2200 … 2400

If the final speed is not reached, the following faults may be present:
   
Speed too highForward clutch slips, overrunning clutch slips
Speed too low up to 200 rpm:Check engine setting
Speed too low above 200 rpm:Torque converter defective

In case of doubt first check the engine setting and if necessary correct.
The correct torque converter must always be assigned to the correct gearbox → Chapter.
   

Measure main pressure > < Measure limit speed of the hydraulic converter