skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Vehicle electrics > < Changing oil in the Haldex coupling

Octavia Mk1

Replacing oil filter for Haldex coupling
Replacing oil filter for Haldex coupling
Special tools and workshop equipment required
t  Wrench for oil filter of Haldex coupling -T10066 -
Removing
–  Position catch pan underneath.
   
–  Slacken oil filter with wrench -T10066- and unscrew.
Fitting position: The oil filter -A- (covered by the frame) is located on the right vehicle side near the front mounting bracket -B-.
Install
–  Moisten gasket of new oil filter with oil for Haldex coupling.
–  Screw in oil filter -A- and tighten with wrench -T10066-.
–  Change oil in the Haldex coupling → Chapter.
  N39-0827

Vehicle electrics > < Changing oil in the Haldex coupling