- Running gear
- Electrical System
- Body
- Heating, Air conditioning
- Drive unit
- Power transmission
- Gearbox 002
- Manual Gearbox 02J
- Manual gearbox 02M, 02Y
- 5 speed Manual gearbox 02K
- Automatic gearbox 01M
- Manual gearbox 02C
- Technical Data
- Self diagnosis, V.A.G Inspection Service
- Clutch, control
- Gearbox mechanics,operation, construction,diff.
- Gearbox,mechanics,gears,shafts,internal operation
- Final drive, differential, differential lock
- Replace the flange shaft gasket rings
- Replace gasket ring for the propshaft output flange in the angle gearbox
- Disassembling and assembling the differential gear
- Adjusting the differential gear
- Disassembling and assembling angle gearbox
- Replacing the needle bearing (polygon bearing) for joint flange/output shaft
- Setting shank and head bevel gear (drive train)
- Removing and installing propshaft
- Repairing the propshaft
- Replace gasket ring for flange/propshaft on rear final drive (final drive removed)
- Replace gasket rings for flange shaft rear final drive (final drive installed)
- Replace O-rings in rear final drive
- Removing and installing the rear final drive
- Checking the gear oil level in the rear final drive
- Check oil level in the Haldex coupling or change oil
- Check oil level in the Haldex coupling
- Changing oil in the Haldex coupling
- Replacing oil filter for Haldex coupling
- Vehicle electrics
- Heating, ventilation, air conditioning system
- Power unit