skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Gearbox 02R > < Differential gear

Roomster

Install
Install
For left gasket ring
   
–  Drive the new seal ring in up to the stop, do not twist the seal ring.
For right gasket ring
  S39-0144
–  Drive the new gasket ring into the bushing up to the stop, do not twist the gasket ring.
Proceed as follows for both gasket rings
–  Fill half the space between the sealing and dust lip with sealing grease -G 052 128 A1-.
The further installation occurs in reverse order, while paying attention to the following:
–  Check gear oil level, if necessary fill up to lower edge of filler hole → Chapter.
–  Check the axial measurement of the vehicle → Chassis; Rep. gr.44.
  S39-0145
Tightening torques
Flange shaft to gearbox → Chapter
Coupling rod to anti-roll bar → Chassis; Rep. gr.40
Drive shaft to flange shaft → Chassis; Rep. gr.40
Steering joint to track control arm → Chassis; Rep. gr.40
Wheel bolts to wheel hub → Chassis; Rep. gr.44

   

Gearbox 02R > < Differential gear