Skoda Workshop Service and Repair Manuals > Yeti > Heating, ventilation, air conditioning system | Heating, Air conditioning | Air conditioner | Climatic, air conditioning system with manual control | Removing and installing the evaporator vent temperature sender G263

Removing and installing the evaporator vent temperature sender G263

Removing and installing the evaporator vent temperature sender - G263-

Removing

–	Remove the side cover of the centre console on the front passenger side → Body Work; Rep. gr.68.

–	Rotate sender by 90° -arrow- and take out.

–	Disconnect plug -1- from sender.

Install

Installation is performed in the reverse order, pay attention to the following points:

When installing, pay attention to the correct seating of the gasket ring.

Skoda Workshop Service and Repair Manuals