skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Climatronic - Air conditioner with automatic regulation) > < Removing and installing the evaporator vent temperature sender G263

Yeti

Removing and installing intake air grid
Removing and installing intake air grid
Removing
–  Remove the cooling water tank cover → Body Work; Rep. gr.64.
   
–  Screw out screws -arrows- (1.3 Nm) and remove the cover -1-.
  S87-0352
–  Unscrew the fixing nuts -arrows- (2.5 Nm) and remove the air intake grid upwards.
Install
Installation is performed in the reverse order, pay attention to the following points:
  Note
The gasket must be correctly positioned at the intake air grid.
  S80-0139

Climatronic - Air conditioner with automatic regulation) > < Removing and installing the evaporator vent temperature sender G263