Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
2. Install the ATF cooler pipe to cylinder head.
Tightening torque: 7.35 Nm (0. 75 kgf-cm, 5.42 ft. lbs.)
3. Connect the ATF cooler hose to pipe transmission side.
NOTE:
^
Install so that the hose is not folded over, excessively bent, or twisted.
^
Be careful to insert the hose to the specified position.
4. Connect the ATF cooler hose to pipe of radiator side.
NOTE:
^
Install so that the hose is not folded over, excessively bent, or twisted.
^
Be careful to insert the hose to the specified position.
5. Install the under cover.
6. Fill ATF.
NOTE: Make sure there are no ATF leaks in joints between the transmission, radiator, pipes, and hoses.
2. TURBO MODEL
1. Install the oil cooler outlet and inlet pipes.