4 Runner 2WD L4-2.7L (2TR-FE) (2010)
Hood Shock / Support: Procedures
DOOR / HATCH: HOOD SUPPORT: DISPOSAL
1. DISPOSE OF HOOD SUPPORT ASSEMBLY
(a) Horizontally hold the hood support in a vise with the piston rod pulled out.
(b) Wear safety glasses. Gradually cut any area between A and B shown in the illustration using a metal saw to release the gas.
Standard:
CAUTION:
Although the gas inside the hood support is colorless, odorless and harmless, there is a possibility that metal debris could scatter.
Therefore, cover it with a piece of cloth or other material.