Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
/Page-792006.png)
NOTICE:
-
The hub bearing could be damage if it is subjected to the vehicle weight, such as when moving the vehicle with the drive shaft removed.
Therefore. if it is absolutely necessary to place the vehicle weight on the hub bearing, first support it with the SST.
SST 09608-16041 (09608-02020. 09608-02040)
-
w/ABS:
After disconnecting the drive shaft from the axle hub, work carefully so as not to damage the sensor rotor serrations on the drive shaft.
1. JACK UP VEHICLE AND REMOVE FRONT WHEEL
2. REMOVE ENGINE UNDER COVERS
3. M/T:
DRAIN TRANSAXLE OIL
A/T:
DRAIN DIFFERENTIAL FLUID
4. REMOVE ABS SPEED SENSOR
Remove the bolt and the speed sensor.
