Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
5. REMOVE DRIVE SHAFT LOCK NUT
(a) Remove the cotter pin and lock cap.
(b) While applying the brakes, remove the nut.
6. DISCONNECT TIE ROD END FROM STEERING KNUCKLE
(a) Remove the cotter pin and nut.
(b) Using SST, disconnect the tie rod end from the steering knuckle.
SST 09628-62011
7. DISCONNECT LOWER BALL JOINT FROM LOWER ARM
Remove the bolt and the 2 nuts.
8. DISCONNECT DRIVE SHAFT FROM AXLE HUB
Using a plastic hammer. disconnect the drive shaft from the axle hub.