Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2718004.png)
(b) Remove the rear door service hole cover.
NOTICE:
Remove any tape remaining on the door.
12. REMOVE REAR DOOR WINDOW FRAME REAR MOULDING
13. REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP
14. REMOVE REAR DOOR GLASS RUN
(a) Remove the rear door glass run.
15. REMOVE REAR DOOR FRAME BRACKET
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the 2 rear door frame bracket.
16. REMOVE REAR DOOR WINDOW FRAME REAR LOWER SUB-ASSEMBLY
(a) Loosen nut A.
