Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-451003.png)
c. Install the flywheel and 2 spacers onto the crankshaft.
d. Using several steps, uniformly install and tighten the 8 mounting bolts in the sequence shown in the illustration.
Torque: 83 Nm (846 kgf-cm, 61 ft. lbs.)
3. INSTALL DRIVE PLATE & RING GEAR SUBASSEMBLY (for Automatic Transmission)
a. Using SST, hold the crankshaft.
SST 09213-54015 (91651-60855), 09330-00021
b. Apply adhesive to 2 or 3 threads of the mounting bolt end.
Adhesive: Part No. 08833-00070, THREE BOND 1324 or equivalent
c. Install the drive plate and 2 spacers onto the crankshaft.
d. Using several steps, uniformly install and tighten the 8 mounting bolts in the sequence shown in the illustration.
Torque: 83 Nm (846 kgf-cm, 61 ft. lbs.)
4. INSTALL TRANSMISSION ASSEMBLY
