Tacoma 4WD V6-4.0L (1GR-FE) (2006)
COMPONENTS
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE HEATED OXYGEN SENSOR
3. REMOVE EXHAUST PIPE ASSEMBLY CENTER
a. Remove the 2 bolts and 2 compression springs, then separate the exhaust pipe center.
b. Separate the 4 insulators from the exhaust tail pipe, then remove the exhaust pipe center.
4. REMOVE EXHAUST FRONT PIPE ASSEMBLY NO. 2
a. Remove the 2 bolts and 2 nuts, then separate the exhaust front pipe No. 2 from the exhaust front pipe.
b. Remove the 2 nuts, then separate the exhaust front pipe No. 2 from the exhaust manifold LH.
c. Separate the insulator, then remove the exhaust front pipe No. 2.
5. REMOVE EXHAUST PIPE ASSEMBLY FRONT
a. Remove the 2 nuts, then remove the exhaust front pipe.