toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

All Technical Service Bulletins for Catalytic Converter: > < Water Pump|Specifications|Page 2321
Page 1
background image

Catalytic Converter: Customer Interest
Exhaust System - Excessive Sulfur Odor

ENGINE
EG014-06

March 1, 2006

Title:
EXCESSIVE SULFUR ODOR

Models:
'06 Tacoma (1GR-FE)

Introduction

Some customers may complain of excessive sulfur odor on 2006 model year Tacoma vehicles equipped with the 1GR-FE (V6) engine under the
following conditions:

^

Stop and go driving

^

Heavy acceleration

In order to reduce the sulfur odor, new catalytic converter assemblies have been made available. Follow the repair procedure to replace the catalytic
converter assemblies.

NOTE:

For more complete understanding of the root cause, refer to TSB No. EG003-03, "Sulfur Odor from Exhaust."

Applicable Vehicles
^

2006 model year Tacoma vehicles equipped with the 1GR-FE (V6) engine.

Parts Information

* NOTE:

The original part numbers (17410-0P020, 17450-0P020, and 17450-0P030) are currently used in vehicle production and are still available as service
parts. The repair part numbers (17410-0P140, 17450-0P090, and 17450-0P100) should only be used when the customer complains of sulfur odor.

Repair Procedure

Refer to the Technical Information System (TIS): 2006 model year Tacoma Repair Manual: Exhaust: Exhaust Pipe Assy (1GR-FE).

Warranty Information

Applicable Warranty:

This repair is covered under the Toyota Specified Major Emission Control Component Warranty. This warranty is in effect for 96 months or 80,000
miles, whichever occurs first, from the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

All Technical Service Bulletins for Catalytic Converter: > < Water Pump|Specifications|Page 2321