Tercel Sedan 2-Door L4-1456cc 1.5L SOHC (3E-E) (1991)
d. Then quickly install the ring gear on the differential case.
e. Align the matchmarks on the ring gear and differential case.
f.
Install the six set bolts. Tighten the set bolts uniformly and a little at a time in succession. Torque the bolts.
Torque: 1,260 kg-cm (91 ft-lb, 124 N-m)
3. INSTALL SIDE BEARINGS
a. Install the speedometer drive gear to the RH side.
b. Using SST and a press, press the side bearings to the both sides of the case.
SST 09350 - 32014 (09351 - 32090, 09351 - 32120)
4. MEASURE DIFFERENTIAL SIDE BEARING PRELOAD
a. Install the differential to the transaxle case.
b. Install the transmission case.
c. Install and torque the case bolts.
Torque: 300 kg-cm (22 ft-lb, 29 N-m)