Tercel Sedan 2-Door L4-1456cc 1.5L SOHC (3E-E) (1991)
/Page-688004.png)
d. Using SST and torque meter, measure the preload.
SST 09564 - 32011
Preload (at starting):
New bearing: 8 - 16 kg-cm (6.9 - 13.9 in.-lb, 0.8 - 1.6 N-m)
Reused bearing: 5 - 10 kg-cm (4.3 - 8.7 in.-lb, 0.5 - 1.0 N-m)
If the preload is not within specification, remove the transmission case side outer race of the side bearing with SST.
Select another shim.
HINT: The preload will change about 3 - 4 kg-cm (2.6 - 3.5 in.-lb, 0.3 - 0.4 N-m) with each shim thickness.
