Tundra 2WD V6-4.0L (1GR-FE) (2005)
12. REMOVE SEATBACK COVER AND PAD
a. Remove the seatback cover lower part from the seat frame assembly.
b. Open the fastener.
c. w/ Side airbag:
Remove the nut and disconnect the seatback cover bracket from the seat frame assembly.
d. Remove the hog rings from the seat frame assembly.
e. Remove the hog rings from the seat frame assembly.
f.
Remove the hog rings shown in the illustration from the seat frame assembly.
g. Remove the seatback cover and pad from the seat frame assembly.