Tundra 2WD V6-4.0L (1GR-FE) (2005)
b. Remove the 2 screws and vertical adjuster handle.
9. REMOVE SEAT CUSHION INNER SHIELD
a. Remove the screw from the seat cushion inner shield.
b. Using a screwdriver, remove the seat cushion inner shield.
HINT: Tape the screwdriver tip before use.
10. REMOVE FRONT SEAT INNER BELT
a. Disconnect the wire harness clamps and connectors.
b. Remove the nut and front seat inner belt.
11. REMOVE ARMREST ASSEMBLY
a. Using a screwdriver, remove the armrest cap.
b. Remove the bolt, armrest spacer, armrest lock plate and armrest assembly.
c. Remove the spacer from the armrest assembly.