Tundra 2WD V6-4.0L (1GR-FE) (2005)
i.
Deploy the airbag.
1. Connect the red clip of the SST to the battery positive (+) terminal and the black clip of the SST to the battery negative (-) terminal.
2. Check that no one is within a 10 m (33 ft) radius of the tire which the front seat airbag assembly LH is tied to.
3. Press the SST activation switch and deploy the airbag.
CAUTION: When deploying the airbag, make sure that no one is near the tire.
HINT: The airbag deploys as the LED of the SST activation switch comes on.
Replacement Requirements
REPLACEMENT
REPLACEMENT REQUIREMENTS
In the given cases, replace the seat frame assembly or seatback cover with a new one.
CAUTION: For removal and installation procedures of the seat frame assembly, see Removal and Installation. Be sure to follow the correct procedure.