Tundra 2WD V6-4.0L (1GR-FE) (2005)
/Page-1351014.png)
g. Place the tires.
1. Place at least 2 tires under the tire which the front seat airbag assembly is tied to.
2. Place at least 2 tires over the tire which the front seat airbag assembly is tied to. The top tire should have the disc wheel installed.
NOTE: Do not place the SST connector under the tire because it could be damaged.
3. Tie the tires together with 2 wire harness.
CAUTION: Make sure that the wire harness is tight. Looseness in the wire harness results in the tires coming free due to the shock when
the airbag is deployed.
h. Install the SST.
Connect the connectors of the 2 SST to the side airbag assembly connector.
SST 09082-00700
NOTE: To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock. Also, secure some slack for
the SST wire harness inside the tire.