Venza FWD V6-3.5L (2GR-FE) (2010)
SST : 09228-06501
Torque : 25 Nm (255 kgf-cm, 18 ft-lbf)
NOTICE:
Make sure that there is no clearance between the parts after tightening the oil filter cap.
(g) Apply a light coat of engine oil to a new O-ring and install it to the oil filter cap.
Text in Illustration
NOTICE:
Remove all dirt and foreign matter from the installation surface.
(h) Install the oil filter drain plug to the oil filter cap.
Torque : 13 Nm (127 kgf-cm, 10 ft-lbf)
NOTICE:
Make sure that the O-ring does not get caught between the parts.
4. ADD ENGINE OIL
(a) Add clean engine oil and install the oil filler cap.
Engine Oil
Standard Capacity (w/ Oil Cooler)