|
Remove lower engine compartment cover – see operation
"Lower Engine Compartment Cover, Remove and Install" in group
"A".
Detach wiring harness plug (1) from oil pressure switch.
Detach oil pressure switch (2) from cylinder block –
collect escaping engine oil.
Install
Attach oil pressure switch to cylinder block with new seal ring
– tightening torque 30 Nm / 22 lbf. ft.
Connect wiring harness plug to oil pressure switch.
Install lower engine compartment cover – see operation
"Lower Engine Compartment Cover, Remove and Install" in group
"A".
|
