Bearing play – crankshaft bearing cap removed.
Caution
To prevent thread from tearing when removing con-rod bearing
cap, remove grease from con-rod journal and lightly oil con-rod
bearing shell. Do not turn crankshaft.
Measure
With "Plastigage" (deformable plastic thread).
Cut thread to bearing width and lay axially between crankshaft
journal and bearing shell (arrow). Install crankshaft bearing cap
with torque – tightening torque 50 Nm / 37 lbf. ft. + 45°
+ 15°.
Note: The bolts can
be reused for checking crankshaft bearing play.
|