|
Illustration X 12 XE
|
1
|
Air intake hose
|
|
2
|
Air cleaner housing
|
|
|
Lower part
|
|
3
|
Air cleaner housing
|
|
|
Upper part
|
|
4
|
Air intake manifold
|
|
5
|
Hot film
|
|
|
mass air flow meter
|
|
6
|
Air intake hose
|
|
7
|
Air intake cover
|
|
8
|
Air intake pipe with
|
|
|
resonator
|
|
|
Note: Any possible
contamination (grease, oil, etc.) must be cleaned from hoses and
connections prior to assembly.
Strict observance of a torque of 3.5 Nm / 2.6 lbf. ft. must be
ensured when tightening the hose clamps.
Caution
Only if the hose clamps are correctly tightened to the specified
tightening torque, can sealing of the intake system and thereby
operational safety be ensured.
|
