Disconnect wiring harness plug (1) from oil pressure switch,
remove oil pressure switch (2) from oil pump – place
collecting basin underneath.
Inspect
Check oil pressure with KM-498-B (3) and KM-135 (4).
At idling speed, the oil pressure should be approx. 150 kPa (1.5
bar) and the oil temperature should be >= 80 °C.
Install
Attach oil pressure switch to oil pump – tightening torque
30 Nm / 22 lbf. ft.
Connect wiring harness plug to oil pressure switch.
Check engine oil level and correct if necessary.
|