Ribbed V-belt Tensioner, Remove and Install
Remove
Remove air cleaner housing – see illustration "Air Ducts X
14 XE, Z 14 XE, X 16 XEL,Z 16 XE, Z 16 YNG" or "Air Ducts X 18 XE1,
Z 18 XE, Z 18 XEL".
Remove ribbed V-belts – see operation "Ribbed V-belts,
Remove and Install".
Remove right front wheel.
Remove lower right engine splash guard.
Detach ribbed V-belt tensioner (1) from alternator support.
|
|
Install
Attach ribbed V-belt tensioner to alternator support –
tightening torque 35 Nm / 26 lbf. ft.
Caution
Pins on ribbed V-belt tensioner must engage in bores in
alternator support.
Install
Install lower right engine splash guard.
Wheel, front right – tightening torque 110 Nm / 81 lbf.
ft.
Install ribbed V-belt – see operation "Ribbed V-belt,
Remove and Install".
Install air cleaner housing – see illustration "Air Ducts
X 14 XE, Z 14 XE, X 16 XEL, Z 16 XE, Z 16 YNG" or "Air Ducts X 18
XE1, Z 18 XE, Z 18 XEL".
|