|
Accelerator Pedal, Remove and Install
 Remove
|
Remove lower instrument panel padding inner panelling (footwell
panelling) – see operation "Lower Instrument Panel Padding
Inner Panelling, Remove and Install" in group "C".
Remove fastening nuts (1) – remove accelerator pedal.
Detach wiring harness plug (2).
|
|
Install
Connect wiring harness plug.
Attach accelerator pedal to bulkhead with new nuts –
tightening torque 6 Nm / 4 lbf. ft.
Install lower instrument panel padding inner panelling (footwell
panelling) – see operation "Lower Instrument Panel Padding
Inner Panelling, Remove and Install" in group "C".
|
