Coolant Temperature Sensor, Remove and Install
Remove
Detach wiring harness plug (1) from hot film mass air flow meter
and wiring harness plug (2) from coolant temperature sensor.
Detach coolant temperature sensor (3) from coolant pump cover
– collect escaping coolant.
|
|
Install
Attach coolant temperature sensor to coolant pump cover –
tightening torque 18 Nm / 13 lbf. ft.
Connect wiring harness plug to coolant temperature sensor and
hot film mass air flow meter.
Inspect
Charge coolant – see operations "Cooling System, Charge
and Bleed" and "Cooling System, Check for Leaks".
|