|
Heat Shields, Remove and Install
 Remove
|
For Z 16 SE engine: Remove fastening bolts for ignition cable
wiring trough.
Disconnect spark plug connectors and lay ignition cables aside.
Remove heat shields from cylinder head with KM-834-A (1).
|
|
Install
Coat heat shields with assembly paste (white) and install at
cylinder head with KM-834-A – tightening torque 25 Nm / 18
lbf. ft.
Connect spark plug connectors.
For Z 16 SE engine: Remove fastening bolts for ignition cable
wiring trough.
|
