Vauxhall Workshop Service and Repair Manuals > Astra G > J Engine and Engine Aggregates | OHC Petrol Engine | Oil Circulating | Repair Instructions

Oil Intake Pipe, Remove and Install

Remove

Remove oil pan – see operation "Oil Pan, Remove and Install".

Remove oil intake tube (1) from oil pump and cylinder block.

Install

Attach oil intake pipe to oil pump with new seal ring – tightening torque 8 Nm / 6 lbf. ft. 1) .

Attach oil intake manifold to cylinder block – tightening torque 8 Nm / 6 lbf. ft.

Install oil pan – see operation "Oil Pan, Remove and Install".

1 ) Recut thread before re-use and install bolts with screw locking compound – (red). Installation time including the torque test is max. 10 min.

Vauxhall Workshop Service and Repair Manuals