|
Rear Screen Wiper Motor, Remove and Install
 Remove
|
Tailgate inner panelling – see operation "Inner Panelling
– Tailgate, Remove and Install (Models F08/F48) or (Models
F35/F70)" in group "C".
Unclip fastening cover for rear screen wiper arm (1).
For Models F35/F70, apply KM-6159 (2),
for Models F08/F48, apply KM-6166 (2) and remove rear screen
wiper arm (arrow) by tightening remover screw (3).
|
|
Remove
Release wiring harness plug and disconnect.
Screw off wiper motor – 3 screws.
- Rear screen wiper – Models F08/F48
- Rear screen wiper – Models F35/F70
|
|
Install
Wiper motor, wiring harness plug, wiper arm, tailgate inner
panelling.
Torque
Rear screen wipe arm – tightening torque 9 ± 0.5 Nm
/ 6.6 ± 0.4 lbf. ft.
|
