|
Replace Curtain Airbag (not deployed) - L35 from
MJ 2007
 Remove
| 1. |
Remove moulded headlining
| • |
L35 - with adjustable rear seat bench 
|
| • |
L35 - without adjustable rear seat bench
|
|
|
| 2. |
Remove curtain airbag
Note: The curtain
airbag cannot be removed without destroying it and must be
replaced.
| • |
Release and disconnect wiring harness plug
|
|
|
Install
| 3. |
Attach guide strip (1) to new curtain airbag
|
|
|
| 4. |
Install new curtain airbag
Note: Ensure that the
bent fastening clamps lie fully on the body!
| • |
Tighten 8x bolts 1.5 Nm
|
| • |
Connect and latch wiring harness plug
|
|
| 5. |
Attach curtain airbag in area of A-pillar (1)
|
| 6. |
Attach curtain airbag in area of C-pillar (2)
|
|
|
| 7. |
Install moulded headlining
| • |
L35 - with adjustable rear seat bench
|
| • |
L35 - without adjustable rear seat bench
|
|
| 8. |
Readiness indicator
Note: After ignition
ON, the airbag system readiness indicator illuminates for 4 seconds
and then goes out
|
|
