Front seat backrest, replace (OPC sports seat
)
Remove
1. |
Disconnect battery
Note: Wait 1 minute for
airbag to deactivate!
|
2. |
Place seat in the most forward position
|
3. |
Detach front seat belt securing panel (1)
|
4. |
Detach seat belt from front seat
|
|
|
5. |
Detach driver's seat, rear
|
6. |
Remove front seat
Note: Disconnect wiring
harness plug.
• |
Remove from the front guide
|
|
|
|
7. |
Detach height adjuster panel
• |
Unclip with a plastic wedge
|
|
8. |
Detach height adjuster
• |
Unscrew 2x bolt (1) and remove lever
|
|
|
|
9. |
Remove adjusting wheel for front seat backrest
• |
Unclip with a plastic wedge
|
|
|
10. |
Detach outer panelling
• |
Remove front of panelling from guide (2)
|
|
|
11. |
Remove interior panelling
|
|
|
|
12. |
Partly detach front seat backrest panelling
• |
Detach panelling all round (I)
|
|
|
|
14. |
Remove side airbag
• |
Release and disconnect wiring harness plug
|
|
|
15. |
Uncover airbag cable harness
|
16. |
Remove central wiring harness plug for seat in vehicles with
heated seats
|
17. |
Uncover wiring harness for seat heating, if fitted
• |
Disconnect and uncover wiring harness plug (arrows)
– |
Detach 3x cable tie (1)
|
|
|
|
|
18. |
Remove front seat backrest
• |
Unscrew 4x bolt (1, 2)
– |
Remove front seat backrest
|
|
|
|
|
19. |
Detach rotary handle on vehicles with lumbar support
|
20. |
Remove head restraints
|
21. |
Detach head restraint guide sleeve
• |
Detach 2x head restraint guide sleeve with a suitable tool
|
|
22. |
Remove upholstery covering
• |
Detach upholstery covering from seat frame all the way
round
|
• |
Detach upholstery covering from Velcro tape
|
• |
Remove upholstery covering
|
|
|
|
23. |
Remove upholstery padding
|
Install
24. |
Attach upholstery padding
|
25. |
Attach upholstery covering
• |
Fit upholstery covering
|
• |
Attach upholstery covering to Velcro tape
|
• |
Fasten upholstery covering to seat frame all the way round
|
|
26. |
Install headrest guide sleeve
|
27. |
Install headrest
• |
Insert head restraint until it audibly engages
|
|
28. |
Install rotary handle in vehicles with lumbar support
|
29. |
Install front seat backrest
|
30. |
Lay wiring harness for seat heating, if fitted
|
31. |
Lay airbag cable harness
|
32. |
Install central wiring harness plug for seat
|
33. |
Insert side airbag
• |
Connect and latch wiring harness plug
Note: Ensure correct
wiring harness routing
|
|
35. |
Fasten front seat backrest panelling
• |
Fasten panelling all round
|
|
36. |
Install interior panelling
|
37. |
Install exterior panelling
|
38. |
Attach seat belt at front seat
|
39. |
Attach seat belt fastening panel
|
40. |
Install adjusting wheel for front seat backrest
• |
Clip in adjusting wheel
|
|
41. |
Install height adjuster
|
42. |
Install height adjuster panel
|
43. |
Install front seat
Note: Connect wiring
harness plug
• |
Insert into front guide
|
|
44. |
Attach front seat, rear
|
45. |
Return seat to its original position
|
47. |
Program volatile memories
|
|