Replace seat occupancy detection mat
Remove
2. |
Wait 1 minute for airbag to deactivate
|
3. |
Detach front seat belt fastening panel
• |
Unclip panel upwards (1)
|
|
4. |
Detach seat belt from front seat
|
|
|
5. |
Detach driver's seat, rear
|
6. |
Remove front seat
• |
Remove from front guide
|
• |
Release and disconnect compact connector
|
|
|
|
7. |
Detach height adjuster panel
• |
Unclip with a plastic wedge
|
|
8. |
Detach height adjuster
• |
Unscrew 2x bolt (1) and remove lever
|
|
|
|
9. |
Remove rear seat backrest aduster wheel
• |
Unclip with a plastic wedge
|
|
|
10. |
Detach outer panelling
• |
Remove front of panelling from guide (2)
|
|
|
11. |
Remove interior panelling
|
|
|
|
12. |
Release front seat backrest upholstery covering
• |
Detach panelling all round (I)
|
|
|
|
13. |
Detach side airbag
• |
Release and disconnect wiring harness plug
|
|
|
14. |
Detach side airbag wiring harness
|
15. |
If present, remove seat heating wiring harness
• |
Disconnect and uncover wiring harness plug (arrows)
|
• |
Detach 3x cable tie (1)
|
|
|
|
16. |
Remove front seat backrest
• |
Remove front seat backrest
|
|
|
|
17. |
If present, expose seat heating cable
• |
Detach 5x cable ties (1)
|
• |
Unclip 2x wiring harness
|
• |
Unclip wiring harness plug from compact plug
|
• |
Expose wiring harness from grooved tube (2)
|
• |
Expose seat heating wiring harness
|
|
|
|
18. |
Detach seat frame
• |
Unscrew 4x screw (arrows)
|
|
|
|
19. |
Remove upholstery covering
• |
Detach upholstery covering all the way round
|
• |
Detach 16x upholstery clamps
|
• |
Remove upholstery covering
|
|
|
|
20. |
Remove upholstery padding
|
Install
21. |
Attach upholstery padding
|
22. |
Attach upholstery covering
• |
Put on upholstery covering
|
• |
Attach 16x upholstery clamps
|
• |
Fasten upholstery covering all the way round
|
|
24. |
Route seat heating cable
• |
Route seat heating wiring harness
|
• |
Insert wiring harness into grooved tube
|
• |
Clip wiring harness plug into compact plug
|
• |
Clip in 2x wiring harness
|
|
25. |
Install front seat backrest
|
26. |
Attach seat heater wiring harness
• |
Connect wiring harness plug
|
|
27. |
Attach side airbag wiring harness
|
28. |
Attach side airbag
• |
Connect and latch wiring harness plug
Note: Ensure correct
wiring harness routing.
|
|
29. |
Front seat back upholstery covering, attach
• |
Insert upholstery covering into guide all round
|
|
32. |
Attach rear seat backrest star handle
|
33. |
Install height adjuster
|
34. |
Install height adjuster panel
|
35. |
Install front seat
• |
Connect wiring harness plug
|
• |
Insert into front guide
|
|
36. |
Attach front seat, rear
|
37. |
Attach front seat seat belt
• |
Tighten bolt 20 Nm
Note: Use screw locking
compound
|
|
38. |
Insert front seat belt securing panel
• |
Place front seat in original position
|
|
40. |
Program volatile memories
|
|