Replace water drain hose actuation unit, rear -
L69
1. |
Remove moulded headlining
|
2. |
Remove luggage compartment panelling (side)
|
|
3. |
Detach water drain hose
• |
Detach water drain hose (1) from plenum chamber connection
(2)
|
|
|
4. |
Pull water drain hose (1) out of luggage compartment floor
Note: Remove water
drain hose (1) at bottom of luggage compartment floor
• |
Remove 2x cable ties (arrow)
|
• |
Carefully pull out water drain hose (1)
|
|
|
|
5. |
Untie pulling wire
• |
Untie pulling wire from water drain hose
|
|
Install
6. |
Tie pulling wire to new water drain hose
• |
Fasten pulling wire to new water drain hose!
|
|
7. |
Install water drain hose
• |
Pull in water drain hose using pulling wire
Note: A second mechanic
is required for pulling
|
|
8. |
Untie pulling wire
• |
Untie pulling wire from water drain hose
|
|
9. |
Attach water drain hose to actuation unit
• |
Attach water drain hose to plenum chamber connection of
actuation unit
|
|
10. |
Attach water drain hose to luggage compartment floor
• |
Insert water drain hose in luggage compartment floor
|
• |
Check for correct installation position of water drain hose at
bottom of luggage compartment floor
|
|
11. |
Remove luggage compartment panelling (side)
|
12. |
Install moulded headlining
|
|