|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Trouble Codes
- If any of the following trouble codes with status PRESENT are stored, perform the related actions.
With trouble code P1105 recognised:
Data List
- Select the following Functional System on the diagnostic tester:
Motronic 7.6.1, Z 20 LEH, Z 20 LEL, Z 20 LER
- Check the following data list parameters:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
