Test
|
Work Order Description
|
Nominal Value
|
T001
|
Check: Fuel Reserve
|
- Check fuel reserve
- Check fuel tank for correct fuel sort content
Note:
The fuel reserve must be greater than 6 L
|
|
|
T002
|
Actuator Test
|
Actuator Tests
- Select the following Functional System on the diagnostic tester:
Motronic 7.6.1, Z 20 LEH, Z 20 LEL, Z 20 LER
- Select and enable diagnostic tester actuator test:
After successful test/fault repair proceed to the next test step
|
|
|
T003
|
Check: Fuel Pressure
|
- Ignition OFF
- Connect fuel pressure manometer KM-J-34730-91 to fuel feed line
- Ignition ON
Actuator Tests
- Select the following Functional System on the diagnostic tester:
Motronic 7.6.1, Z 20 LEH, Z 20 LEL, Z 20 LER
- Select and enable diagnostic tester actuator test:
Actuator Test Fuel Pump Relay
|
Pressure value okay?
3800 hPa ( 3.8 bar )
|
|
T004
|
Check: Fuel Pipes and Fuel Filter
|
- Check the following component for proper operation:
Fuel pipes and fuel filter
Note:
Plugging, leakage or air in fuel system
|
|
|