vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Simtec 71 > < Spark Plugs, Remove and Install

Accelerator Pedal Module, Remove and Install

  Remove

1.   Open driver's door
2.   Remove lower instrument panel upholstery inner panelling (footwell panelling)
3.   Disconnect wiring harness plug (1)
•   Detach wiring harness plug in direction of arrow
4.   Remove accelerator pedal
•   Unscrew 3x nuts (2)
Object Number: 2416560  Size: DEFAULT


  Install

5.   Install accelerator pedal
•   Tighten 3x nut 12 Nm
Use new nuts
6.   Fix wiring harness plug
7.   Install lower instrument panel upholstery inner panelling (footwell panelling)
8.   Close driver's door

Simtec 71 > < Spark Plugs, Remove and Install