Replace camshaft sensor
Remove
2. |
1. |
Remove air cleaner housing - Z16XEP |
2. |
Remove air cleaner housing - Z16XE1 |
|
3. |
Detach front toothed belt cover (top) (1)
• |
Release upper catch (3)
|
• |
Pull front toothed belt cover (top) upwards by cast projection
(arrow), applying slight tension
|
|
|
|
4. |
Unscrew bolt, camshaft sensor (1)
• |
Turn crankshaft until accessibility is guaranteed for bolt
|
|
|
|
5. |
Remove camshaft sensor
• |
Disconnect wiring harness connector.
|
• |
Take out camshaft sensor (1) by turning it
|
|
|
|
Install
6. |
Install camshaft sensor
• |
Fix wiring harness plug
|
|
7. |
Attach front toothed belt cover (top)
Important: Ensure that it is
latched correctly
|
• |
Tighten 2x bolt 6 Nm
|
|
8. |
1. |
Install air cleaner housing - Z16XEP |
2. |
Install air cleaner housing - Z16XE1 |
|
|