vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Radiator Inlet Hose Replacement - LDD, LUH, and LUJ > < Engine Oil Cooler Pipe Replacement - 1.6L LLU

Astra J

Engine Coolant Thermostat Housing Replacement (1.4L LDD)

Removal Procedure

1. Open the hood.
2. Drain coolant fluid. Refer to Cooling System Draining and Filling .
3. Remove the radiator inlet hose from the engine coolant thermostat housing. Refer to Radiator Inlet Hose Replacement .

           2191770


4. Disconnect the engine coolant temperature sensor wiring harness plug (1).

           2190371


5. Remove the 3 engine coolant thermostat housing bolts (1).
6. Remove the engine coolant thermostat housing (2) and the engine coolant thermostat housing seal ring (3).

Installation Procedure

1. Clean the sealing surfaces.

           2190371


2. Install the engine coolant thermostat housing (2) and a NEW engine coolant thermostat housing seal ring (3).

Caution: Refer to Fastener Caution .
3. Install the 3 engine coolant thermostat housing bolts (1) and tighten to 8 N·m (71 lb in) .

           2191770


4. Connect the engine coolant temperature sensor wiring harness plug (1).
5. Install the radiator inlet hose to the engine coolant thermostat housing. Refer to Radiator Inlet Hose Replacement .
6. Fill up coolant fluid. Refer to Cooling System Draining and Filling .
7. Close hood.

Radiator Inlet Hose Replacement - LDD, LUH, and LUJ > < Engine Oil Cooler Pipe Replacement - 1.6L LLU