vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Radiator Inlet Hose Replacement - 2.0L Diesel LBQ, LBR, LBS, and LBX > < Coolant System Flushing

Radiator Outlet Pipe Replacement (2.0L Diesel LBQ, LBR, LBS, and LBX)



2189738




Callout


Component Name


Preliminary Procedures

1. Open the hood.
2. Drain the cooling system. Refer to . Cooling System Draining and Filling
3. Remove the air cleaner outlet front duct. Refer to . Air Cleaner Outlet Front Duct Replacement
4. Remove the air cleaner outlet rear duct. Refer to . Air Cleaner Outlet Rear Duct Replacement
5. Remove the upper radiator outlet hose clamp and hang the hose aside.

Special Tools

GE-47622   Hose Clamp Pliers .

For equivalent regional tools, refer to Special Tools .


1


Radiator Outlet Pipe Bolt (Qty: 2)

Caution: Refer to Fastener Caution .

Tighten
9 N·m ( 80 lb in)


2


Radiator Outlet Pipe Gasket

Procedure

Remove and install a NEW radiator outlet pipe gasket prior installation of the pipe.


3


Radiator Outlet Pipe

Procedure

Place an impounding basin underneath.

 

Radiator Inlet Hose Replacement - 2.0L Diesel LBQ, LBR, LBS, and LBX > < Coolant System Flushing