vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Radiator Inlet Hose Replacement - LDE, LGE, LLU, LXV, 2H0, LUW and LFH > < Water Pump Replacement - LDE, LXV, 2H0, LUW and LFH

Throttle Body Heater Outlet Hose Replacement (LDE, LXV, 2H0, LUW and LFH)

Removal Procedure

1. Open the hood.
2. Place a collection basin under the vehicle.

           2027527



3. Clip out the throttle body heater outlet hose from the intake manifold.
4. Loosen the clamp and disconnect the throttle body heater outlet hose (2) from the radiator surge tank (1).
5. Disconnect the throttle body heater outlet hose connector from the throttle body (3).
6. Remove the throttle body heater outlet hose (2).

Installation Procedure


           2027527



1. Install the throttle body heater outlet hose (2).
2. Connect the throttle body heater outlet hose connector to the throttle body (3)
3. Connect the throttle body heater outlet hose (2) to the radiator surge tank (1) and install the clamp.
4. Clip in the throttle body heater outlet hose to the intake manifold

           2189523



5. Top off the coolant by filling to the bottom line (black arrow) on the coolant surge tank (1), if necessary.
6. Close the hood.

Radiator Inlet Hose Replacement - LDE, LGE, LLU, LXV, 2H0, LUW and LFH > < Water Pump Replacement - LDE, LXV, 2H0, LUW and LFH