Water Pump Pulley Replacement (1.6L LGE - CNG, and 1.8L
2H0)
Removal Procedure
2. |
Loosen the 3 water pump pulley
bolts (1). |
|
Note: Counterhold
against crankshaft balancer bolt.
|
4. |
Remove the 3 water pump pulley
bolts (1). |
5. |
Remove the water pump pulley
(2) from the water pump (3). |
Installation Procedure
1. |
Install the water pump pulley
(2) to the water pump (3). |
2. |
Install the 3 water pump
pulley bolts (1). |
4. |
Tighten the 3 water pump
pulley bolts (1) to 20 N·m (15 lb ft)
. |
|
Note: Counterhold
against crankshaft balancer bolt.
|
|