Astra J
Generator Replacement (LDE, LXV, LLU, 2H0, LUW and LFH)Removal Procedure
|
1. | Open the hood. |
2. | Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection . |
3. | Remove the generator and air conditioning compressor belt. Refer to Drive Belt Replacement . |
4. | Remove the generator wiring harness nut (2). |
5. | Remove the generator positive cable nut (1). |
6. | Remove the 2 generator bolts (2). |
7. | Remove the generator (1). |
Installation Procedure
1. | Install the generator (1). |
Caution: Refer to Fastener Caution . |
2. | Install the 2 generator bolts (2) and tighten to 35 N·m (26 lb ft) . |
3. | Install the generator wiring harness nut and tighten to 20 N·m (15 lb ft) . |
4. | Install the generator positive cable nut (1) and tighten to 7 N·m (62 lb in) . |
5. | Install the generator and air conditioning compressor belt. Refer to Drive Belt Replacement . |
6. | Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection . |
7. | Close the hood. |