Glow Plug Removal
Special Tools
• |
EN-6104
Remover/Installer Glow Plugs 12 mm |
• |
EN-48390
Remover/Installer Glow Plugs 9 mm |
For equivalent regional tools, refer to
Special Tools .
1. |
Disconnect the 2 glow plug
connectors (1) from the glow plugs with pressure sensor (3) at
cylinder (1, 4). |
2. |
Disconnect the 2 glow plug
connectors (2) from the glow plugs with out pressure sensor (4) at
cylinder (2, 3). |
3. |
Remove the 2 glow plugs with
pressure sensor (3) from the cylinder (1, 4), using the
EN-6104 remover/installer . |
4. |
Remove the 2 glow plugs with
out pressure sensor (4) from the cylinder (2, 3), using the
EN-48390 remover/installer . |
|