Oil Pan Installation
| 1. |
Clean the sealing
surfaces. |
|
Note: The complete
installation procedure of the oil pan should be done in 10
minutes.
|
| 2. |
Apply silicone sealing
compound (2) to the oil pan sealing surface (1). The thickness of
the sealing bead (1) should be 3.0 - 4.0 mm (0.118 - 0.157
in). |
| 3. |
Install the oil pan
(1). |
| 4. |
Hand tighten the 2 oil pan
nuts (1). |
| 5. |
Hand tighten the 13 oil pan
bolts (2). |
| 6. |
Tighten the 13 oil pan bolts
and the 2 oil pan nuts in sequence as shown: |
| |
• |
Tighten in first step to
4 N·m (35 lb in) . |
| |
• |
Tighten in second step to
9 N·m (80 lb in) . |
| 7. |
Install the transmission
support brace (1). |
| 8. |
Install the 4 transmission
support brace bolts (2) and tighten to 30 N·m (22 lb
ft) . |
|
Note: For vehicles
with air conditioning
|
| 9. |
Install the air conditioning
compressor bracket (1). |
| 10. |
Install the 4 air conditioning
compressor bracket bolts (2) and tighten to 22 N·m
(16 lb ft) |
|
