Drive Belt Replacement
Special Tools
• |
EN-48488
Holding Wrench |
For equivalent regional tools, refer to
Special Tools .
Removal Procedure
4. |
Install EN-48488
holding wrench (2) to the drive belt tensioner (1).
|
5. |
Move the drive belt tensioner
clockwise until the drive belt tensioner can be fixed with
EN-955-2 locking pin (1). |
6. |
Remove the EN-48488
holding wrench . |
9. |
Remove the drive belt.
|
Installation Procedure
1. |
Install the drive belt.
|
4. |
Install the EN-48488
holding wrench (2) to the drive belt tensioner (1).
|
5. |
Move the drive belt tensioner
clockwise until EN-955-2 locking pin (1) can be
removed. |
6. |
Allow the tensioner to slide
back slowly. |
7. |
Remove the EN-48488
holding wrench . |
|