Exhaust Camshaft Replacement
Removal Procedure
2. |
Remove the camshaft bearing
cap bolts in a spiral sequence as shown one turn at a time until
there is no spring tension pushing on the camshaft. |
|
Note: Mind the
markings on the camshaft bearing caps to ensure they will be
installed in the same position.
|
3. |
Remove the 10 camshaft bearing
cap bolts (1). |
4. |
Remove the 5 camshaft bearing
caps (2). |
5. |
Remove the exhaust camshaft
(3). |
Installation Procedure
|
Note: Mind the
markings on the camshaft bearing caps. Camshaft bearing caps should
be installed in their original position.
|
1. |
Lubricate camshaft and
camshaft bearing caps with engine oil. |
2. |
Install the exhaust camshaft
(3). |
3. |
Install the 5 camshaft bearing
caps (2). |
4. |
Install the 10 camshaft
bearing cap bolts (1) and handtighten. |
|
Note: Tighten the
camshaft bearing cap bolts one turn a time to avoid shape
distortion of the camshaft.
|
5. |
Tighten the camshaft bearing
cap bolts one turn at a time in a spiral sequence as shown to
8 N·m (71 lb in) . |
|